Humminbird Fish Finder Garden Nursery Landscaping Guide
Humminbird Fish Finder Helps You Locate Prime Fishing Spots
By Rodger G Allenby
For anyone who enjoys sport fishing, a fish finder is a gift
from the heavens. The technology of these hand held devices is
always progressing and many anglers are utilizing these devices
as fishing guides.
These fish locators survey the water to help you find prime fishing
spots. Among the most popular choices on the market is the Humminbird
fish finder. This sturdy, lightweight piece of equipment can help
you hook the greatest catch of your life.
Protecting Your Device From The Elements
Humminbird produces ten different lines of electronic fish finders,
each having several models within a line. The devices are made
from sturdy, durable hard plastic that provides maximum protection
from the elements and any possible damage that may occur on the
water.
Some lines of Hummingbird fish finders have stretch neoprene
covers available to protect them from water damage. There are
protective cases designed to cover the mounting assembly of the
unit as well.
Suction Cup Transducer
The Humminbird finder is small enough to be used on speedboats,
canoes and even inflatable boats, as the suction cup transducer
will work with any material. This fish finder uses dual beam,
fish finder sonar.
One beam is a 60 degree beam to find the fish and the other is
a 20 degree beam to accurately display the bottom and structure.
This allows you to see if fish are hiding among weeds or in a
concave on the floor of the water.
Mounting The Humminbird On Your Boat
Mounting a Humminbird fish finder can be easily done with a few
hand tools. It's best to do this with a friend so that you have
an extra pair of hands available for holding the parts in place.
Pre-drill the holes to prevent damage to the boat.
Mount the unit in the desired location, using the hardware that
came with it. Normally, the installation kit features 4 Phillips
head screws. Next, connect the electrical leads from the unit
to the relay box of your boat, connecting the power to a hot wire
and the ground to your ground plate.
Mounting The Transducer At The Back Of The Boat
If you don't have a relay box, then the leads from the Humminbird
can be connected directly to the battery. Match the negative to
negative and the positive to positive. Finally, mount the Hummingbird
transducer to the bottom of the boat. This is normally done at
the rear of the boat.
Put silicone around the transducer to prevent any water from
penetrating where the holes were made. Route the cable from the
transducer to the input of the Humminbird fishfinder view screen
and screw it into the input jack. It's quite a simple process
but make sure to read the manual carefully.
Looking At The Digital Readings
After turning on the fish finder, look at the digital readings
that appear on the screen. Depending on the Humminbird fishfinder
model you have, these could be depth, water temperature and boat
speed readings.
These readings are based on the location of the transducer that
sends sonar signals from the water to the fish finder. The line
across the bottom of the screen is the floor of the lake, river
or reservoir.
Terrain On The Bottom
The undulations on the screen mirror the terrain on the bottom.
A thick, dark line represents a hard bottom, while a thin, light
line indicates a soft bottom. Lines or other objects that extend
up from the bottom likely are submerged timber, rocks or vegetation.
Arches on the screen represent fish. On some models, you will
see fish icons. The icons vary in size depending on the size of
the fish. However, the device can sometimes mistake debris for
fish.
Programming The Settings On Your Device
Once your Humminbird fish finder is installed, you will need
to program the settings. Choosing the "Normal" operation
mode uses factory set defaults that allow some control over the
settings.
This mode allows you to quickly use the unit's sonar functions
without making in-depth setting changes. For more options, press
the "View" button while in "Normal" mode to
cycle through the different sonar modes. There are seven different
options on this menu, from standard sonar all the way to side-looking
sonar.
Use the "Menu" option when you encounter factory default
settings that are not accurate. The Humminbird is definitely one
of the easiest fish finders to use, and now that you've had fish
finders explained, you will find one of these devices to be a
handy tool to have onboard.
About the Author:
Rodger G Allenby has written a number of articles on gardening
and landscaping including Mum
Flowers, Table
Top Fountains, Garden
Supplies, Green
Lawn, Grass
Seed, Bird
Baths, Hummingbird
Feeders, Gardening
Tools, Backyard
Putting Green, Backyard
Ideas, Backyard
Landscaping Pictures, Outdoor
Fire Pit, Underground
Pet Fence, Backyard
Fences, Above
Ground Storage Tank, Enclosed
Porch.
Keep a lookout for more of his articles on this website.
Little Known Facts About Fish Finders ....
Fishing, for the most part, is a waiting game. You cast your
line out and you wait for a fish to swim by and take the bait.
Then comes the struggle and the exhilaration of pulling in your
catch. But what if you are not finding the fish?
You can cast your line out all day long but if the fish are not
in that area it is not going to do you any good. Fish finders
can help with that. They can help you see what is beneath your
boat and help you find the fish you want.
RECOMMENDED READING
|
